Rode NT1-KIT Large-Diaphragm Cardioid Condenser Microphone Specs
Microphone
Primary Applications | Live Sound, Studio Recording |
Form Factor | Large Diaphragm Mic / Stand/Boom Mount |
Intended Sound Sources | Vocals, Speech/Voice Over, Instrument |
Sound Field | Mono |
Operating Principle | Pressure Gradient |
Capsule | 1 x Condenser |
Diaphragm | 1″ / 25.40 mm |
Polar Pattern | Cardioid |
Orientation | Side Address |
Circuitry | Solid-State (JFET) |
Pad | None |
High-Pass Filter | None |
Tone Adjustment | None |
Gain Adjustment | None |
Indicators | None |
On-Board Controls | None |
Windscreen | None |
Performance
Frequency Range | 20 Hz to 20 kHz |
Maximum SPL | 132 dB SPL |
Impedance | 100 Ohms |
Sensitivity | -29 dBV/Pa at 1 kHz |
Output Level | 8 mV (Max, 1 kHz) |
Dynamic Range | 128 dB |
Signal-to-Noise Ratio | 90 dB A-Weighted |
Equivalent Noise Level | 4.5 dB A-Weighted |
Connectivity
Output Connectors (Analog) | 1 x XLR 3-Pin Male (on Mic) |
Headphone Connector | None |
Power
Bus Power | None |
Operating Voltage | 24 V (Phantom Power) 48 V (Phantom Power) |
Physical
Color | Black |
Mounting | Shockmount (Included) |
Included Case | None |
Included Filters | Pop Filter |
Construction Material | Aluminum |
Dimensions | ø: 2 x L: 7.4″ / ø: 5 x L: 18.7 cm |
Weight | 15.5 oz / 440 g |
Packaging Info
Package Weight | 4.95 lb |
Box Dimensions (LxWxH) | 10.5 x 8.25 x 6.75″ |
Rode AI-1 Studio-Quality USB Audio Interface Specs
Connectivity
Analog Audio I/O | 1 x Combo XLR-1/4″ TRS Mic/Line Input 2 x 1/4″ TRS Balanced Line Output 1 x 1/4″ TRS Headphone Output |
Phantom Power | +48 V |
Digital Audio I/O | None |
Host Connection / USB | USB Type-C |
MIDI I/O | None |
Performance
Frequency Response | 20 Hz to 20 kHz ±1 dB |
Gain/Trim Range | Inputs: 0 to 45 dB |
Max Output Level | Monitor Outputs: -6 dBu |
Headphone Output Power | 24 mW into 32 Ohms 245 mW into 300 Ohms |
Impedance | Hi-Z Inputs: 0.9 Megohm Mic Inputs: 1.3 Kilohms |
Dynamic Range | 104 dBu |
EIN | -128 dBA |
Digital Audio
Sample Rates | 44.1 / 48 / 88.2 / 96 kHz |
Bit Depths | 24-Bit |
Latency | Zero-Latency Direct Monitoring |
Compatibility
OS Compatibility | macOS 10.10 or Later Windows 7 or Later |
Physical
Form Factor | Tabletop |
Channels of I/O | 1 Input / 2 Output |
Max Sample Rate/Resolution | 96 kHz / 24-Bit |
Number of Mic Preamps | 1 |
Dimensions | 4.9 x 3.9 x 1.5″ / 124 x 100 x 38 mm |
Weight | 19.8 oz / 561.3 g |
Packaging Info
Package Weight | 1.155 lb |
Box Dimensions (LxWxH) | 7 x 5.1 x 2.55″ |
Reviews
There are no reviews yet.